Subsidies by canton
100% freeCalculate your subsidies in the canton of Fribourg across 14 cantonal programmes — official rates, eligibility and sources. Amounts are indicative; the cantonal decision is authoritative.
Free · Based on official cantonal rates
CHF 50 /m²
Choose the official Fribourg measure applicable to the envelope. · Check the general conditions, measure sheets and documents to attach. · Check possible municipal subsidies directly with the municipality.
Building built before 2000
CHF 60 /m²
Have the share of façade and roof areas actually insulated calculated: the 90 % threshold excludes walls and floors against earth. · File the application before works start, together with measure M-01.
Building built before 2000
Identify whether the project concerns heating, a technical installation or solar thermal. · Check the impulse measures introduced since 2025 for outputs above 70 kWth. · Confirm submission via the official portal before works.
from CHF 3'500
Confirm the air/water HP solution. · Confirm the admissible thermal power. · Check the technical requirements of the Fribourg M-05 sheet.
from CHF 5'000
Confirm the ground/water or water/water HP solution. · Confirm the admissible thermal power. · Check drilling, label and requirements of the Fribourg M-06 sheet.
from CHF 5'000
Confirm the network connection as the target solution. · Confirm the admissible thermal power. · Check the network conditions per the Fribourg M-07 sheet.
CHF 1'000 – 1'500
Check whether a CECB Plus is required or useful for the project. · Mandate a recognised expert if the programme requires it. · Attach the CECB documents to the subsidy file.
Building built before 2000
CHF 100 – 200 /m²
Confirm the targeted Minergie certification before submission. · Check the project's official ERA. · Submit the request before works.
Building built before 2000
Check the number of dwellings before qualifying this option. · Identify the technical installations concerned. · Check the deadline and available budget of the programme.
Gather the SwissEnergy performance guarantee, the conformity declaration (OEEE) and the performance declaration (OPCo). · File the application before works start: no subsidy is granted for works already under way (art. 24 of the 17 November 1999 Subsidies Act).
from CHF 3'000
Gather the conformity declaration (OEEE) and the SwissEnergy performance guarantee. · File the application before works start: no subsidy is granted for works already under way (art. 24 of the 17 November 1999 Subsidies Act).
from CHF 1'200
Check the collectors are listed on kollektorliste.ch and obtain Swissolar's validated performance guarantee. · File the application before works start: no subsidy is granted for works already under way (art. 24 of the 17 November 1999 Subsidies Act).
Have the hydraulic distribution network quoted alongside the new heat generator. · File the application before works start: no subsidy is granted for works already under way (art. 24 of the 17 November 1999 Subsidies Act).
Search for the municipality's and the electricity provider's subsidies by postal code. · File the municipal application BEFORE the works, like the cantonal one.
Programmes de subventions en matière d'énergie - État de Fribourg
Enter what you know about your building and your project. The calculation applies the published cantonal rates, measure by measure.
Indicative total of sizeable subsidies
CHF 1'000 – CHF 1'500
Indicative amounts computed from the published cantonal rates and your own figures. They are not a decision: the final amount depends on the file, the technical conditions and the cantonal ruling. Measures not shown are not excluded — their rate simply needs a figure you have not entered yet.
Have my project reviewedAn architect reviews your situation and comes back to you personally, with the steps to take before works begin.
The canton of Fribourg runs around 14 energy subsidy programmes (building envelope, heating replacement, heat pumps, solar and more). Source: Programmes de subventions en matière d'énergie - État de Fribourg.
Eligibility depends on construction year, the existing heating system and the measure. Enter your address to get a first reading for your parcel.
No. The amounts shown are indicative estimates; the final amount is set by the cantonal subsidy authority.
The calculator on this page applies the official rates of the canton of Fribourg measure by measure. Enter your energy reference area, number of dwellings and planned works — the amounts appear straight away, free and without an account.
Find out which subsidies and building rights actually apply to your property in Fribourg.
